Five loose faceted gemstones on pale limestone beside oatmeal linen.

Diamond is the hardest gemstone at 10 on the Mohs scale. Among familiar jewelry stones, lab-grown moissanite follows at 9.25, then ruby and sapphire at 9. Those scores tell you which stones resist scratches. A diamond can still chip if its edge takes a sharp blow.

The same comparison applies to stone bracelets with small polished beads. The Moss Agate Bracelet uses polished 4 mm chalcedony beads on an adjustable gray cord. Quartz-family beads sit below sapphire on the hardness scale. If you take off a sapphire ring and a bead bracelet at the end of the day, give them separate spots in the tray so the stones can't rub together.

MOSS AGATE BRACELET

MOSS AGATE BRACELET

30-day free returns

The hardest gemstones in order

Ruby and sapphire share one row because both are varieties of corundum. Spinel and topaz are different minerals that happen to share a score. Quartz gives you a point of comparison for stones often used in bead jewelry.

Gemstone Mohs hardness What to consider when wearing it
Diamond 10 Resists scratches exceptionally well. Protect thin edges and exposed points from sharp knocks.
Lab-grown moissanite 9.25 A scratch-resistant option for a clear center stone. It's a different material from lab-grown diamond.
Ruby and sapphire 9 Corundum combines high scratch resistance and good toughness. Colorless sapphire is an option for a clear center stone.
Chrysoberyl, including alexandrite 8.5 Alexandrite combines high hardness with excellent toughness. Check for surface-reaching fractures or fillers before choosing a cleaning method.
Spinel 8 Good toughness makes it a practical candidate for a colored ring stone.
Topaz 8 A sharp impact can split it along a cleavage plane. Consider a protective setting or a pendant.
Quartz, including amethyst and citrine 7 A useful reference for comparing other stones. Keep quartz away from harder gems in storage.

What the gemstone hardness scale measures

A harder material can leave a scratch on a softer one. Sapphire can scratch topaz, and topaz can scratch quartz. Stones with the same Mohs rating can scratch each other, so store ruby and sapphire pieces separately too. The intervals between those numbers vary. Diamond is much harder than corundum even though the two sit one whole number apart. The ten original Mohs minerals give you reference points, starting with talc and ending with diamond.

Gold ruby signet and dark silver sapphire ring in separate compartments of a walnut tray.

Think about the surface of a polished bead. Fine scratches can dull that finish over time. Chipping is a different kind of damage, and light, heat or chemicals can affect some stones or their treatments even when the polish looks intact. Those are the three parts of durability described in GIA's guide to how gemstones wear.

Why two Mohs 8 stones wear differently

A spinel and a topaz can both resist a scratch from quartz, yet a sharp knock can split topaz along a natural plane of weakness called cleavage. Spinel has good toughness. If you're choosing a colored ring to wear often, that difference gives spinel an advantage. If you prefer topaz, ask about a setting that shields its edge or choose a pendant where it will meet fewer hard surfaces.

Red spinel ring beside a pale blue topaz pendant with a silver bezel on limestone.

Diamond can chip where a point or thin edge is exposed. Jade makes a useful comparison. Jadeite rates 6.5 to 7, and nephrite rates 6 to 6.5. Both can pick up scratches from harder stones, yet both have exceptional toughness. The names on a listing matter when you want to know how jadeite and nephrite handle wear.

The White Jade Bracelet uses polished 4 mm beads and a sliding knot. Its rounded beads are a different shape from a faceted stone with exposed corners. When you're comparing bracelets, look at the bead profile and how far it sits above your wrist as well as the material listed.

WHITE JADE BRACELET

WHITE JADE BRACELET

30-day free returns

Choosing a stone for the piece you wear

A ring that meets desks and doorframes

For a ring you'll wear most days, start with the knocks it will take. Sapphire or ruby gives you color and high scratch resistance. Spinel is another option if you like a darker stone. Look at the ring from the side before you decide. A high center stone has more exposed surface, and a pointed cut can leave its tips vulnerable. A low setting with metal around the edge gives the stone more protection.

A bezel wraps metal around the edge of a stone. You can also ask whether the setting protects individual points, especially on a pear or marquise cut. Check for a bent prong or movement in the setting if the ring takes a blow. If the stone moves, set the ring aside until a jeweler can look at it.

Oval blue sapphire set low inside a continuous silver bezel on a ring.

Ask whether the center stone has been fracture-filled and how the jeweler recommends cleaning it. Ruby itself rates 9 on the Mohs scale. A filler in the stone can be sensitive to heat or chemicals. Get the care instructions for that particular stone, especially if you plan to have the ring cleaned or resized later.

A bracelet next to a watch

Try the bracelet on, bend your wrist and turn your hand palm up. Notice whether the beads slide into the side of the case. They may sit clear when your arm is still and touch every time you reach for something. If they keep meeting, adjust the bracelet so the two sit apart or wear them on opposite wrists.

Front of a hand with the Picture Jasper Bracelet and a small gap beside a steel watch.

The Picture Jasper Bracelet has polished 4 mm beads on an adjustable nautical cord. Put the watch on first so you can check the bracelet against the case. Leave enough room for the cord to sit comfortably and check where the nearest bead lands when you flex your wrist.

PICTURE JASPER BRACELET

PICTURE JASPER BRACELET

30-day free returns

If you spend part of the day leaning on a desk, notice where the bracelet rests when you type. A close fit can keep the beads from sliding into a watch, while a little movement may feel better under a shirt cuff. When you're wearing a stone bracelet day to day, the cord and metal details have their own care needs. Follow the care instructions for the finished piece.

A pendant that sees less contact

A pendant is a sensible place for a stone you'd hesitate to put in a ring. It generally meets fewer edges and hard surfaces. If you wear two necklaces together, check whether the pendants land on top of each other. At home, a soft pouch or a separate compartment keeps stones and metal edges from rubbing in the drawer.

The same rule applies when you travel. Close each piece in its own compartment or pouch, especially if you're packing a diamond ring beside polished beads. A loose ring can shift every time the bag moves, and even another diamond can scratch it.

Frequently asked questions

What is the second hardest gemstone after diamond?

Among the jewelry materials in this guide, lab-grown moissanite comes next at 9.25. Sapphire and ruby are familiar natural alternatives at Mohs 9. Lab-grown diamond has the same Mohs hardness as natural diamond.

Can you tell if a stone is a diamond by scratching glass?

Quartz, sapphire and other materials can scratch glass too. The same mark could come from several different gems. If the identity matters, ask a gemologist to examine the stone and leave its polish intact.

READY-MADE
Layered turquoise and white bracelets worn on a wrist
Bracelet sets

Save 20%

Coordinated pieces, ready to wear.

Shop bracelet sets
Free shipping Gift box + pouch
YOUR CHOICE
Hands holding turquoise, blue, and white bracelets
Build your own set

Up to 15%

Pick any 3 or 5 bracelets.

Build your stack
Free shipping over $50 Gift box + pouch

From a customer

“Still wearing it two months later.”

Nick Verified · Sicily set

Recent Posts

  1. How to Make a Sliding Knot for a Bracelet: Two Easy Methods
  2. Seed Bead Bracelets Ideas: 15 Designs in Pictures
  3. 12 Clay Bracelet Ideas You Can Make With Flat Beads
  4. 5 Beaded Bracelet Patterns You Can Make Without a Loom